Clavia c1 Guida Utente
Nord C1 Combo Organ
System Functions
OS V1.0X
15
System Functions
ABOUT SYSTEM SETTINGS
System settings are global; they are not stored within a
program, but applies to all programs all of the time.
program, but applies to all programs all of the time.
The system settings are divided into 3 menus:
• System menu
• MIDI menu
• Sound menu
• MIDI menu
• Sound menu
A list of each menu and it’s functions is printed on the front
panel.
panel.
CHANGING SYSTEM SETTINGS
To change a a system function:
1
Select the appropriate menu
Press
SHIFT
+
SYSTEM
/
MIDI
/
SOUND
buttons.
2
Select function
The current functions number is shown in the
DIS-
PLAY, as well as it’s current setting. Navigate through
the available functions by using the
the available functions by using the
PROG/MENU
but-
tons.
3
Change setting
Press
SHIFT
+
VALUE
buttons to navigate though the
functions possible settings.
Changes are automatically saved.
4
Press any of the
SYSTEM / MIDI / SOUND
buttons to
exit the menu
THE SYSTEM MENU
THE MIDI MENU
1 Memory protect
default value:
OF
ON
Program store is disabled.
OF
Program store is enabled.
2 Output Routing
default value:
ST
SP
Split Output: tonewheel organ is directed to
HIGH LEVEL
OUT and LEFT OUT.
Electric-V and Electric-F organs are directed to
Electric-V and Electric-F organs are directed to
RIGHT
OUT.
ST
Stereo Output.
3 Transpose
default value:
0
-6 - +6
Sets transpose of both manuals and
BASS PEDAL input in
range of -6 semi notes to + 6 semi notes, steps of 1 semi
note.
note.
4 Fine Tune
default value:
40
27 - 53
Sets the tuning from 427 Hz to 453Hz, in steps of 1 Hz.
Default value is 40 (440Hz).
Default value is 40 (440Hz).
5 Sustain Pedal Polarity
default value:
CL
CL
Pedal Closed: for use with a sustain pedal with closed polar-
ity.
ity.
OP
Pedal Open: for use with a sustain pedal with open polarity.
6 Sustain Pedal
default value:
ON
Controls weather the selected organ model should respond to sustain
pedal messages. When a pedal is connected to the
pedal messages. When a pedal is connected to the
SUSTAIN PEDAL
input, sustain pedal messages are always send via
MIDI OUT regard-
less of this setting.
ON
Sustain pedal messages enabled.
OFF
Sustain pedal messages disabled.
7 Rotary Control Type
default value:
CL
Specifies the type of controller connected to the Rotary Control input.
If the Half Moon Switch option is selected the speed control buttons
on the front panel are disabled.
If the Half Moon Switch option is selected the speed control buttons
on the front panel are disabled.
HA
Half Moon Switch: for use with the Half Moon Switch acces-
sory.
sory.
OP
Pedal Open: For use with a sustain pedal with open polarity.
CL
Pedal Closed: For use with a sustain pedal with closed
polarity.
polarity.
8 Rotary Pedal Mode
default value:
HD
TO
Toggle: rotary speed is changed between
SLOW and FAST
each time the pedal is pressed down. By holding the pedal
pressed downed for the duration of 1 second the speed will
change to
pressed downed for the duration of 1 second the speed will
change to
STOP.
HD
Hold: rotary speed follows the state of the pedal.
9 Swell Pedal Type
default value:
RO
Here you can match the swell pedal characteristic for various manu-
facturers.
facturers.
FA
Fatar.
ER
Ernie Ball.
YA
Yamaha.
RO
Roland.
10 Factory Reset
Press
STORE to recall all system settings. Stored PROGRAM MODE
data is not affected.
LIVE 1 and LIVE 2 data will be overwritten.
1 Upper Channel
default value:
1
Sets how messages are sent and received from the
UPPER manual via
MIDI IN and MIDI OUT.
OFF
Messages are not sent.