Clavia c1 Guida Utente
The Effect Section
User Manual
14
Controlling the Rotary Speaker
speed
speed
The rotary speaker speed is set with the
buttons of the
buttons of the
ROTARY SPEAKER
section.
You can also connect an external con-
trol to the
trol to the
ROTARY CONTROL
input, such
as a sustain pedal or the Half Moon Switch Accessory.
A sustain pedal can operate by momentarily changing the
speed setting or by toggling between
speed setting or by toggling between
SLOW
and
FAST
.
• When used momentarily the speed is changed
between
SLOW
and
FAST
only.
• When used in toggle mode you can switch to
STOP
by
holding the pedal in the down position for the duration
of 1 second.
of 1 second.
Please refer to the “System Functions” on page 15 for fur-
ther information.
ther information.
UNISON
A chorus pedal simulation. The
MODE
button toggles between different pre-
sets:
sets:
•
UNISON 1
has a stereo setting with
medium intensity.
•
UNISON 2
has a stereo setting with heavy intensity.
• When no LED is lit the effect is bypassed.
REVERB
The reverb simulates the natural sound
reflections in various acoustic environ-
ments.
reflections in various acoustic environ-
ments.
The
REVERB
knob sets the balance be-
tween the unprocessed and the proc-
essed signal.
essed signal.
By pressing the
REVERB
button you can
choose between five reverb types, indi-
cated by the three LEDs lit one or two at
cated by the three LEDs lit one or two at
a time.
Hall Soft
A reverb with the response and character of a
spacious hall, with a long decay and a mellow
character.
spacious hall, with a long decay and a mellow
character.
Hall
A Hall reverb with a slightly brighter character.
Stage Soft
A reverb with a medium decay time and mellow
character.
character.
Stage
A medium decay reverb, with slightly brighter
character.
character.
Room
Room ambience with a rather short decay time.