ONKYO dv-cp802 Manuale Istruttivo

Pagina di 64
 
18
 
Connecting the DV-CP802
 
—Continued
 
This section explains how to connect the DV-CP802 to 
your TV or projector. 
The TV handles the audio and video. If your TV has a 
Dolby Pro Logic decoder built-in, you’ll be able to enjoy 
DVDs and videos that bear the Dolby Surround logo.
To enjoy Dolby Digital or DTS (5.1-channel surround), 
you’ll need a suitable decoder (see page 19).
The DV-CP802 has three types of video output: compo-
nent video, S-Video, and composite video. Component 
video offers the best picture quality, so if your TV sup-
ports it, use a commercially available component video 
cable to connect the DV-CP802’s COMPONENT video 
output to the component video input on your TV. If your 
TV supports progressive scanning, you must use compo-
nent video in order to take advantage of that feature.
See page 41 for more information on progressive scan-
ning.
S-Video offers better picture quality than composite 
video, so if your TV supports it, use the supplied 
S-Video cable to connect the DV-CP802’s S VIDEO out-
put to an S-Video input on your TV. Failing that, use the 
supplied composite video cable to connect the 
DV-CP802’s VIDEO output to a composite video input 
on your TV.
 
Notes
 
• Before making any connections, turn off the 
DV-CP802 and your TV and disconnect their power 
cords from the wall outlets.
• Refer to the connection information supplied with 
your TV.
• Connect the DV-CP802’s video outputs directly to 
your TV. Don’t connect a VCR in between your 
DV-CP802 and TV. Doing so may result in picture dis-
tortion, because of the copy protection system used on 
DVD-Video discs.
 
Compatibility of this unit with progressive-scan and 
high-definition TVs.
 
This player is compatible with progressive video Macro 
Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL 
HIGH DEFINITION TELEVISION SETS ARE FULLY 
COMPATIBLE WITH THIS PRODUCT AND MAY 
CAUSE ARTIFACTS TO BE DISPLAYED IN THE 
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN 
PICTURE PROBLEMS, IT IS RECOMMENDED 
THAT THE USER SWITCH THE CONNECTION TO 
THE “STANDARD DEFINITION” OUTPUT. IF 
THERE ARE QUESTIONS REGARDING OUR TV 
SET COMPATIBILITY WITH THIS MODEL 525p 
DVD PLAYER, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
 
Connecting Your TV or Projector
 
1
 
Turn off the DV-CP802 and your TV, and 
disconnect their power cords from the 
wall outlets.
 
2
 
Connect the DV-CP802 to your TV as 
shown.
 
3
 
When you’ve completed all connections, 
see “Turning On the DV-CP802” on 
page 21.
L
R
L
R
ANALOG
INPUT
S VIDEO IN
Y
IN
P
B
P
R
VIDEO IN
Only one connection required!
Choose component video,
S-Video, or composite video.
S-Video
cable *
(supplied)
AV cable *
(supplied)
(yellow)
(yellow)
(white)
(white)
Component 
video
cable *
TV or projector
(red)
(red)
 *