ONKYO dv-cp802 Manuale Istruttivo

 

20

 

This section explains how to connect the DV-CP802 to a 
stereo amp or receiver for sound quality better than that 
possible with most TV’s built-in speakers. This is great 
for listening to your CDs and MP3s, and DVDs and 
VCDs will sound better too. You can also enjoy Dolby 
Surround, if your amp supports Dolby Pro Logic.

 

Use an RCA audio cable to connect the DV-CP802’s 
ANALOG AUDIO OUTPUT to a pair of analog audio 
inputs on your amp or receiver, as shown.

 

• Set the Analog Audio Out setting to “2 Channel” (see 

page 22, 52).

• If your amp has a built-in Dolby Pro Logic decoder, to 

enjoy DVDs that bear the Dolby Surround logo, set the 
Analog Audio Out 2 Channel setting to “Lt/Rt” (see 
page 52).

 

Use an optical (or coaxial) digital audio cable to connect 
the DV-CP802’s OPTICAL (or COAXIAL) DIGITAL 
AUDIO OUTPUT to an optical (or coaxial) digital audio 
input on your amp or receiver, as shown.

 

• Be sure to set the Dolby Digital Out setting to “Dolby 

Digital>PCM,” and set the DTS Out setting to 

“DTS>PCM” (see page 50). Otherwise an unpleasant 
digital noise may be heard, which may damage your 
equipment.

• The output formats for the OPTICAL and COAXIAL 

digital audio outputs can be set independently (see 
page 50).

• Never connect the DV-CP802 to the AC-3RF input on 

a Dolby Digital receiver. The AC-3RF format is not 
supported by the DV-CP802.

With 

 (Remote Interactive) you can control the 

DV-CP802 by using the remote controller supplied with 
your Onkyo 

-compatible AV receiver.

 

• Push each plug in all the way to make a good connec-

tion.

• Use only 

 cables for 

 connections.

•

 

• The DV-CP802 has two 

 sockets. You can connect 

either one to the Onkyo AV receiver. The other socket 
is for connecting additional 

-compatible compo-

nents.

• Connect the DV-CP802’s 

 sockets to only Onkyo 

components. Connecting to other manufacturer’s 
components may cause them to malfunction.

(white)

(white)

(red)

(red)

Signal flow

Signal flow

cable

To use         you must make 

an analog audio connection 

(RCA) between the DV-CP802 

and the other component, 

even if they are connected 

digitally.

(Supplied)