ONKYO dv-cp802 Manuale Istruttivo

 

19

 

This section shows how to connect the DV-CP802 to an 
AV receiver for Dolby Digital, DTS, DVD-Audio, and 
SACD playback.

 

To fully enjoy the Dolby Digital and DTS soundtracks 
available on most DVD-Video discs, you need to connect 
one of the DV-CP802’s digital audio outputs (OPTICAL 
or COAXIAL) to a digital audio input on a Dolby Digi-
tal/DTS-compatible AV receiver. You can also enjoy 
Dolby Surround material, if your AV receiver supports 
Dolby Pro Logic.

Use an optical (or coaxial) digital audio cable to connect 
the DV-CP802’s OPTICAL (or COAXIAL) DIGITAL 
AUDIO OUTPUT to an optical (or coaxial) digital audio 
input on your AV receiver, as shown.

 

• Make sure that the Dolby Digital Out setting is set to 

“Dolby Digital,” and that the DTS Out setting is set to 
DTS (see page 50). Otherwise you won’t get surround 
sound.

• The output formats for the OPTICAL and COAXIAL 

digital audio outputs can be set independently (see 
page 50).

• When playing a Dolby Digital or DTS soundtrack, be 

sure to select Dolby Digital or DTS decoding, respec-
tively, on your AV receiver. On some receivers, the 
appropriate listening mode is selected automatically. 
Refer to your AV receiver’s manual.

• You can experience Dolby Digital only with DVDs 

that bear the Dolby Digital logo. Likewise, you can 
experience DTS only with DVDs or CDs that bear the 
DTS logo.

• In addition to a digital connection, it’s recommended 

that you also connect the FRONT/D.MIX 1 AUDIO 
OUTPUT to a spare analog audio input on your AV 
receiver. This will allow you to record audio to a cas-
sette recorder or CD recorder. If your AV receiver sup-
ports Zone 2, you must make an analog audio 
connection in order to select the DV-CP802 as the 
input source for Zone 2.

 

To fully enjoy the multichannel audio of DVD-Audio 
and SACD, you need to connect the DV-CP802’s 5.1-
channel analog audio output to a multichannel analog 
audio input on an AV receiver. Dolby Digital and DTS 
soundtracks can also be fully enjoyed with this type of 
connection.

Use a multichannel analog audio cable (RCA) to connect 
the DV-CP802’s FRONT/D.MIX 2, SURR 1, CENTER, 
and SUBWOOFER AUDIO OUTPUTs to a 5.1-channel 
analog audio input on your AV receiver. (You can use 
several separate RCA audio cables instead of a multi-
channel cable.) Set the SURR MODE (AUDIO OUT) 
switch to 1.

If your AV receiver supports 7.1-channels and you’re 
using back surround speakers, connect the DV-CP802’s 
SURR 2 AUDIO OUTPUTs to the AV receiver’s sur-
round back left and right inputs as well, and set the 
SURR MODE (AUDIO OUT) switch to 1+2.

 

• Refer to the hookup information supplied with your 

AV receiver.

• You can experience Dolby Digital only with DVDs 

that bear the Dolby Digital logo. Likewise, you can 
experience DTS only with DVDs or CDs that bear the 
DTS logo.

• DVD-Video discs may contain Dolby Digital and DTS 

soundtracks. The Dolby Digital soundtrack will be 
selected by default. To play the DTS soundtrack, use 
the movie’s main menu and look under Language or 
Audio Setup. Alternatively, use the remote controller’s 
[AUDIO] button (see page 41).

• See “Analog Audio Out” on page 52 for information 

on how the FRONT/D.MIX 1 and 2 sockets work.

Signal flow

Signal flow