Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
It is also accessed by selecting System Settings > Common Service Settings >
Maintenance > Alignment Adjustment.
Maintenance > Alignment Adjustment.
8. Select Auto Alignment Adjustment.
9. Select Print Calibration Chart.
10. Select Paper Supply.
11. Select the Paper Supply tray for the adjustment/profile needed.
12. Select the Save button.
13. Set the area coverage if needed Coverage is the amount of toner covering the page.
11. Select the Paper Supply tray for the adjustment/profile needed.
12. Select the Save button.
13. Set the area coverage if needed Coverage is the amount of toner covering the page.
Coverage 1 is for Side 1 and Coverage 2 is for Side 2 of the page. You can usually
leave the coverage set to 1. However, if you are experiencing alignment problems
repeadedly on print jobs with high area coverage, you can increase this value
incrementally up to 10.
leave the coverage set to 1. However, if you are experiencing alignment problems
repeadedly on print jobs with high area coverage, you can increase this value
incrementally up to 10.
14. Set the number of sheets to print.
With multiple sheets, the software will use the average values from all sheets to make
adjustments. Therefore it is best to set at least 5 sheets. and so the variation between
the sheets will be reduced.
adjustments. Therefore it is best to set at least 5 sheets. and so the variation between
the sheets will be reduced.
15. Select Print.
16. After the prints are output, touch Confirm.
17. Collect the printed targets from the output area of the press.
16. After the prints are output, touch Confirm.
17. Collect the printed targets from the output area of the press.
Continue to
.
Scanning the Targets
After collecting the printed targets from the press output area, you must review them
and choose which scanning option is the best to use for scanning the targets: the
Document Feeder or the Document Glass
and choose which scanning option is the best to use for scanning the targets: the
Document Feeder or the Document Glass
• Document Glass: Select this option if the targeted media is larger than 11 x 17 in.
(A3) or heavier than 220 gsm.
• Document Feeder: This option provides a faster and easier scan process; however,
the Document Glass is more accurate. The accuracy of the Document Feeder is within
0.2 mm, while the accuracy of the Platen Glass is within 0.1 mm.
0.2 mm, while the accuracy of the Platen Glass is within 0.1 mm.
4-3
Xerox
®
Versant
®
80 Press
System Administration Guide
Simple Image Quality Adjustment (SIQA)