Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 9 of 20
Category
Description
TV Power
One of ‘On’, ‘Off’ or ‘n.a’. ‘n.a’ value means that SV Director cannot
determine the current TV power state. TV Power cannot be accurately
determined for TVs that do not support query responses over RS-232.
determine the current TV power state. TV Power cannot be accurately
determined for TVs that do not support query responses over RS-232.
TV Input
Current input the TV is tuned to.
Video URL
Current Video URL being played on the TV.
DMP Health Status Details
Select Health in the Status Details drawer to view a rollup of the overall DMP
status. In the example shown Figure 5, the roll-up status indicates that there is 1
minor alert for the device health (a device is non compliant).
status. In the example shown Figure 5, the roll-up status indicates that there is 1
minor alert for the device health (a device is non compliant).
The hammer icon appears in situations where the Dashboard has determined
corrective action for the current alert condition. You can click on the hammer
icon to instruct the Dashboard to take the recommended corrective action. For
example, if you click on the hammer icon next to the non compliant device alert in
Figure 5, the Dashboard will execute the Global MIB command on the device.
example, if you click on the hammer icon next to the non compliant device alert in
Figure 5, the Dashboard will execute the Global MIB command on the device.
Press the refresh button after the command completes to refresh the
compliance status.The refresh button is on the top right corner of the DMP and TV
status panels.
status panels.
The Left and Right arrow icons switch between the list and tree view of the
overall DMP status.
Expand the device status category to find out which monitored property is in an alert
state.
state.
Figure 5.
Viewing DMP Health Status Details
Item
Description
Overall
Overall health of the DMP.
DMP State
While a DMP is being provisioned, it transitions
through three states:
through three states:
Not Ready -> Ready -> Production
Not Ready:
The DMP is registered in SV Director but
has not been provisioned.
Ready:
The DMP is provisioned in SV Director but has
not been assigned to a Location. Note that all scripting
is done on Locations and not on DMPs.
is done on Locations and not on DMPs.
In Production:
The DMP is registered, provisioned
and assigned to a Location in SV Director.
SD Card
The status of the SD card.
Factory
Default
Default
Whether the DMP is in the factory default state.
Connectivity
Whether the DMP is connected to the switch.
Compliance
Whether the DMP complies with the Global MIB