Cisco Cisco IOS Software Release 12.0(17)S

To monitor and maintain multilink Frame Relay, use one or more of the following commands in EXEC 
mode:

This section provides the following configuration example:

The following example shows the configuration of bundle “MFR1”. Serial interfaces 5/0/2:0 and 6/0/0:0 
are configured as bundle links.

interface MFR1

no ip address

mls qos trust dscp

frame-relay intf-type dce

frame-relay multilink bid router1

!

interface MFR1.1 point-to-point

ip address 10.0.1.1 255.255.255.0

ip pim sparse-mode

mls qos trust dscp

frame-relay interface-dlci 100

interface Serial5/0

encapsulation frame-relay MFR1

frame-relay multilink lid first-link

frame-relay multilink hello 9

frame-relay multilink retry 3

interface Serial6/0

encapsulation frame-relay MFR1

frame-relay multilink ack 4

Router# debug frame-relay multilink [control [mfr number | 

 number]]

Displays debug messages for multilink Frame 
Relay bundles and bundle links.

Router# show frame-relay multilink [mfr number | serial 

number] [detailed]

Displays configuration information and statistics 
about multilink Frame Relay bundles and bundle 
links.

Router# show interfaces [type number]

Displays statistics for interfaces configured on the 
router or access server.