Cisco Cisco Prime Network 3.10 Guida All'Installazione
4
Before You Begin
To make Prime Network installation and setup as quick and seamless as possible, you need to plan your deployment in advance
and perform the following pre-installation tasks:
and perform the following pre-installation tasks:
•
Read the
.
•
Verify that the devices you intend to manage with Prime Network are supported, using the
•
Review the installation requirements described in
.
2
Installation Requirements
This section provides prerequisites and recommendations for the hardware and software you need to support your
Prime Network deployment. These recommendations are based on the assumptions and target setup for this Quick Start Guide,
as described in
Prime Network deployment. These recommendations are based on the assumptions and target setup for this Quick Start Guide,
as described in
and
If your
network setup is not covered by this guide, please see “Installation Requirements” in the
Cisco Prime Network 3.10 Installation
Guide.
The recommended hardware options for the target setup are either:
•
Gateway and unit co-located on one server (one-server setup). This option requires the installation of the gateway software
only, as the gateway acts as both gateway and unit.
only, as the gateway acts as both gateway and unit.
or
•
Gateway installed on one server, unit installed on a separate server (two-server setup).
Gateway and Unit Requirements
This section provides the prerequisites for the hardware and software required for the Prime Network gateway and unit in the
Quick Start Guide target setups. See
Quick Start Guide target setups. See
and
, for server recommendations.
The prerequisites are relevant for an embedded database installation, where the Oracle database is installed on the gateway
during Prime Network installation and is fully integrated with Prime Network. The gateway and unit can run either Solaris or
Linux operating systems.
during Prime Network installation and is fully integrated with Prime Network. The gateway and unit can run either Solaris or
Linux operating systems.
Note
The hardware requirements are provided under the assumption and recommendation that Prime Network 3.10 does
not share the hardware with additional applications.
not share the hardware with additional applications.