Cisco Cisco D9824 Advanced Multi Decryption Receiver Guida All'Installazione
Configuring Transport Stream Information
OL-29015-01
195
Configuring the DPM ASI Details
Note: The following procedure defines all the available fields. For a typical setup of
the DPM, see Typical set up for Digital Program Mapping (DPM) (on page 221).
the DPM, see Typical set up for Digital Program Mapping (DPM) (on page 221).
Note: After you make any changes, a successfully updated (session open) message
appears. The changes are displayed, but not saved. You must click Apply to save
and apply the changes.
1 From the user interface of the D9824, choose Transport Stream > Digital
appears. The changes are displayed, but not saved. You must click Apply to save
and apply the changes.
1 From the user interface of the D9824, choose Transport Stream > Digital
Program Mapping under ASI Output. The ASI Digital Program Mapping page
is displayed.
is displayed.
2 For each DPM Program Entry, it displays the input channel number (Chl #) and
channel name (Name). There are 32 channels (PE1 to PE32).
Note: Any changes made to the ASI DPM values will automatically change the
Mode Status to Edited by User in the ASI Outputs page.
Note: Any changes made to the ASI DPM values will automatically change the
Mode Status to Edited by User in the ASI Outputs page.
3 In the table, select a program entry row you want to edit.
From the Action drop-down list, choose the DPM program action for the PE
(Pass, Map, or Drop).
Click Save.
(Pass, Map, or Drop).
Click Save.