Cisco Cisco Content Delivery Engine 250 Guida All'Installazione
2.3.1 Validation using the IPMI port
Login to IPMI web GUI and the login page / System Information Page shows the IPMI firmware
Revision.
The Firmware Revision should be “3.06” as shown in the image below:
Revision.
The Firmware Revision should be “3.06” as shown in the image below:
2.3.2 Validation on CDS-TV
Verify the IPMI FW using the following command:
CDE250_Streamer# cat /sys/devices/platform/ipmi_bmc.aabb.32/firmware_revision
This should return “3.6”
This should return “3.6”
Note: Linux will usually strip the “0” from the 3.06 string.
Execute the “sdt” CLI command. Verify this command does not hang (example output is
shown below):
shown below):
CDE250_Streamer# sdt
*****************************************************************************
SuperDoctor II - Linux version 2.111(140922)
Copyright(c) 1993-2014 by Super Micro Computer, Inc. http://supermicro.com/
*****************************************************************************
Monitored Item High Limit Low Limit Status
----------------------------------------------------------------------
Fan1 Fan Speed 715 7031
Fan7 Fan Speed 715 5625
Power1 Fan 1 Speed 4007 7786
Power1 Fan 2 Speed 4007 12251
Power2 Fan 1 Speed 4007 8129
Power2 Fan 2 Speed 4007 12137
CPU1 Vcore Voltage 1.49 0.60 1.06
CPU2 Vcore Voltage 1.49 0.60 1.20
*****************************************************************************
SuperDoctor II - Linux version 2.111(140922)
Copyright(c) 1993-2014 by Super Micro Computer, Inc. http://supermicro.com/
*****************************************************************************
Monitored Item High Limit Low Limit Status
----------------------------------------------------------------------
Fan1 Fan Speed 715 7031
Fan7 Fan Speed 715 5625
Power1 Fan 1 Speed 4007 7786
Power1 Fan 2 Speed 4007 12251
Power2 Fan 1 Speed 4007 8129
Power2 Fan 2 Speed 4007 12137
CPU1 Vcore Voltage 1.49 0.60 1.06
CPU2 Vcore Voltage 1.49 0.60 1.20