Cisco Cisco StadiumVision Mobile Streamer Manuale Di Manutenzione
© 2011
−2015 Cisco Systems, Inc. All rights reserved.
4 of 27
Sending a Command
The Device Configuration, Director Configuration, and Tools drawers contain
categories of commands you can send to DMPs.
categories of commands you can send to DMPs.
To send a command:
1. In the Device List, select the DMP(s) to which you want to send the command.
You can do a search on DMPs using the Search feature.
2. Select a command from one of the Dashboard drawers. Use the Device List
controls to select/deselect devices. You can mouse over any control to display a
tool tip about the control.
tool tip about the control.
Figure 15. Selecting a Device and a Command
3. Make changes to command parameters. Not all commands have user-specified
values.
4. Click the Play button.The following confirmation message is displayed:
“Are you sure you want to execute command ‘command name’ on the selected devices ?”
5. Confirm or cancel the action.
While the command is executing on a device, icons will display in the first column of
the Device List next to the device(s). You can mouse over the first column heading
(blank) to view a tool tip that defines each status icon. Refer to
the Device List next to the device(s). You can mouse over the first column heading
(blank) to view a tool tip that defines each status icon. Refer to
Figure 16. Command Status Icons
When the operation is complete, the results will be updated in the Device List. Use
the scroll bar to view the results for all selected devices. You can view detailed
command from the Device Details tabs.
the scroll bar to view the results for all selected devices. You can view detailed
command from the Device Details tabs.