Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 6 of 40
Device Configuration Commands Overview
The Device Configuration Drawer provides commands that
control common registry settings so you can easily configure
values via text input, drop down boxes, and sliders rather than
manually editing registry settings. Device Configuration drawer
includes commands for:
control common registry settings so you can easily configure
values via text input, drop down boxes, and sliders rather than
manually editing registry settings. Device Configuration drawer
includes commands for:
Commands
Description
Monitoring
Use these commands to check DMP status and connectivity, and to enable/disable monitoring
services and thresholds.
services and thresholds.
Global
Use this command to sets the global MIB variables on the selected DMP(s).
DMP Commands
Use these commands to display the DMP IP address, restart Flash, enables/disable DHCP, update
MIB settings, send RS-232 commands, reboot the DMP, and to control SWF and Media URL files
playing on the DMP. There is also DMP command to set the alpha transparency on the DMP.
MIB settings, send RS-232 commands, reboot the DMP, and to control SWF and Media URL files
playing on the DMP. There is also DMP command to set the alpha transparency on the DMP.
DMP Install
Use these commands to upgrade the DMP 4310G firmware, restore the DMP factory default settings,
set the initial configuration to be deployed to all DMPs in the factory default state, and stage the
Flash template. There are also commands to upgrade the DMP 4305G Kernel and SV Daemon.
set the initial configuration to be deployed to all DMPs in the factory default state, and stage the
Flash template. There are also commands to upgrade the DMP 4305G Kernel and SV Daemon.
TV Commands
Use the TV Commands in the Device Configuration drawer to send RS-232 commands that control
the TV On/Off state, change the TV input and TV display banner, enable/disable closed captioning,
set the TV volume and video channel, and set the SWF that displays when the TV first turns on.
the TV On/Off state, change the TV input and TV display banner, enable/disable closed captioning,
set the TV volume and video channel, and set the SWF that displays when the TV first turns on.
Auto Registration
Use the Auto Registration commands in the Device Configuration drawer to change the DMP state
and provision the DMP for auto registration.
and provision the DMP for auto registration.
Switch Commands
Use the Switch commands in the Device Configuration drawer to control the switch to DMP power
settings, test the switch to DMP cable, send a ping to the switch, and clear the ARP cache.
settings, test the switch to DMP cable, send a ping to the switch, and clear the ARP cache.