Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 28 of 40
Setting the TV External Display Inputs
In a luxury suite, guests can use the Cisco IP Phone to change the TV input to an
external device, such as a DVD player. To make it easier for the guest to select the
input, you can label the TV‟s external inputs 1, 2, 3, or 4. This label will appear on the
IP phone when a user selects TV/Volume. This label also appears on the TV in the
TV identification banner.
external device, such as a DVD player. To make it easier for the guest to select the
input, you can label the TV‟s external inputs 1, 2, 3, or 4. This label will appear on the
IP phone when a user selects TV/Volume. This label also appears on the TV in the
TV identification banner.
Note: The identification banner is set in the DMP upon boot-up. Therefore, changing
the label requires a restart of the DMP to take effect.
the label requires a restart of the DMP to take effect.
Send the TV Commands > Select Display Input command to change the TV display
input to the value set in the Control Panel. The "inputName" parameter refers to the
input name configured for the DMP when it was added in the Control Panel. Once this
value is set in the Control Panel, you must set the inputName parameter and then
send this command. Refer to Figure 17.
input to the value set in the Control Panel. The "inputName" parameter refers to the
input name configured for the DMP when it was added in the Control Panel. Once this
value is set in the Control Panel, you must set the inputName parameter and then
send this command. Refer to Figure 17.
See the StadiumVision Video Endpoint Delivery DIG for details on how to configure
the TV Display Input in the Control Panel.
the TV Display Input in the Control Panel.
Figure 17. Configuring the TV Display Input
Setting the Display Banner
Send the TV Commands > Set Display Banner command to display a graphical
banner on the top of the TV screen output. This banner is used to give the user
feedback by ide
banner on the top of the TV screen output. This banner is used to give the user
feedback by ide
ntifying which DMP‟s / TV‟s received the command. There are
different “Mode” options: Active, Inactive, None. Refer to Figure 18.