Cisco Cisco Prime Collaboration Assurance 11.5 Libro bianco

 

 

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

Page 26 of 40 

c. Enter the following 

◦ 

Host Name/IP Address: IP address of the system where Cisco Prime Collaboration is installed. 

◦ 

User Name: Enter smuser 

◦ 

Password: Default password is smuser 

d. Select the SFTP Protocol. 

e. Directory path: Enter/home/smuser/[Note the/at the end] 

f. Select the Resend on failure check box. 

Step 5.   Click Add. 

Cisco Prime Collaboration relies on the cluster ID of the Cisco Unified Communications Manager cluster to 

uniquely identify and manage the Cisco Unified Communications Manager deployment. Therefore, if two Cisco 

Unified Communications Manager deployments belonging to different clusters have the same cluster ID then Cisco 

Prime Collaboration Assurance cannot manage them as two distinct clusters. Cisco Unified Communications 

Manager has a default cluster name of StandAloneCluster. If you are managing multiple Cisco Unified 

Communications Manager deployments belonging to different clusters, you will need to change the cluster ID of 

these Cisco Unified Communications Managers so that they have unique names. 

To change the cluster ID of a Cisco Unified Communications Manager, do the following: 

Step 1.   Open the Cisco Unified Communications Manager Administration page. 

Step 2.   From the menu, select System, and choose Enterprise Parameters. 

a. The Enterprise Configuration page is displayed. 

Step 3.   In the Cluster ID field, enter a new cluster ID. 

b. The default is StandAloneCluster. This should be changed so that it is unique for every cluster. 

Step 4.   Click Update. 

Step 5.   You will need to restart the Cisco Unified Communications Manager service for these changes to take 

effect. Restarting these Cisco Unified Communications Manager services causes a service disruption. To 
minimize disruption, be sure to schedule this task for a time when system maintenance is being done. 

Cisco TelePresence VCS serves as a call-control appliance for the Cisco TelePresence C Series, E Series, and 

other similar video endpoints. 

You can access Cisco TelePresence VCS through a web browse, http://<vcs_serveraddress>, where 

<vcs_serveraddress> is the IP address or hostname of your VCS appliance. The default password for the 

administrator user admin is TANDBERG. If you cannot log in to the web GUI, Cisco Prime Collaboration will not be 

able to log in either. Unless this problem is fixed, Cisco Prime Collaboration will not be able to successfully manage 

the VCS. If the password is left blank, Cisco Prime Collaboration will not be able to manage it either; it is not 

recommended to leave the password blank.