Cisco Cisco Prime Collaboration Assurance 11.5 Libro bianco

 

 

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

Page 27 of 40 

You can easily turn on SNMP from the Cisco VCS web GUI. Navigate to System > SNMP and enter all the SNMP 

information. Figure 21 is a sample screen shot showing how SNMPv2 is configured. 

Figure 21.    Sample Screen Shot Showing SNMP Configuration 

 

Cisco Prime Collaboration can manage various video endpoints, as shown in Table 1. 

Cisco Prime Collaboration Endpoint Management 

Cisco TelePresence System 3010, 3210, 500, 1300, and 1100 

Cisco TelePresence System Profile 65-inch Dual, Profile 65-inch, Profile 52-inch Dual, Profile 52-inch, and 
Profile 42-inch 

Cisco TelePresence System EX90 and EX60 

Cisco TelePresence System Quick Set C20, Quick Set C40, Quick Set C60, and Quick Set C90 Series 

Generally all three types of access are desirable for all endpoints: SNMP, HTTP, and CLI. 

You can access Cisco TelePresence Server video endpoints through a web browser (preferably using Internet 

Explorer, if possible) by pointing the browser to https://<serveraddress>, where <serveraddress> is the IP address 

or hostname of the Cisco TelePresence Server Video Endpoint. 

SNMP for Cisco TelePresence Server devices is configured using Cisco Unified Communications Manager phone 

configuration. In order to change the SNMP community string, go to Cisco Unified Communications Manager 

Administration. Go to Device > Phone > Search for your Cisco TelePresence Server Endpoints and click the 

Device Name link to go to the phone configuration page. Edit the section as shown in Figure 22 and then click 

Save and Apply Config.