Cisco Cisco TelePresence MX700 Guida All'Installazione

enter required parameters

enter the parameters required for the chosen provisioning infrastructure (see illustrations below). then tap

to complete the procedure.

Webex TelePresence 

upon ordering the Cisco Webex telepresence service, you have

received a

and an

.

Please contact your company's Webex telepresence administrator

if you do not have a video phone number and an activation code.

Cisco UCM

Contact your uCM provider to get the iP address or dNS name

of the Cisco uCM

(

).*

You can find more details about setting up Cisco uCM provi-

sioning in the

guide.

Cisco VCS (for EX Series and MX Series only)

Contact your VCS provider to get the iP address or dNS name

of the Cisco VCS (

), the SiP

, and, if

required, the

/

for authenticating the video

system with the provisioning server.

Have a look at the

Cisco VCS provisioning for eX Series and

appendix for more information on VCS provisioning.

Start the Provisioning Wizard

tap

and then

.

NoTe: 

When you connect a MX or eX system for the first time,

the Provisioning Wizard starts automatically.

Choose provisioning infrastructure

Choose one of the following supported provisioning systems:

•  Webex telepresence
•  Cisco uCM (unified Communications Manager)
•  Cisco VCS (Video Communication Server)

tap

to proceed.

Back to task overview

* the dHCP server can be set up to provide the external Manager

address automatically (dHCP option 150). Any input in the input

field overrides the setting provided by dHCP.

Provisioning set-up

(when using a provisioning system)

Cisco telePresence Video Systems

d14639.08 Video Systems Getting Started Guide tC6.0, february 2013.

Copyright © 2010–2013 Cisco Systems, inc. All rights reserved.

13

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Configuration