Cisco Cisco TelePresence MX700 Guida All'Installazione
Back to task overview
Configuring IP
(when not set by a provisioning system)
Your video conference system supports both iP version 4
(iPv4) and iP version 6 (iPv6). in both cases, the iP param-
eters can be assigned automatically by the network, or you
can set everything manually.
if you want to set the parameters manually, please contact
your network administrator to obtain the required parameters.
if your system is provisioned automatically, these iP settings
may be overridden by the provisioning system.
if an iPv4 or iPv6 address is already assigned to the system, you
will find it in the NetWork section on the System information
page:
tap
Settings ( ) > System Information.
NoTe:
You must restart the system after changing the iP
settings for the changes to take effect
To set or change the IPv4 settings
1. Choose IP version
tap
Settings ( ) > Administrator > IP & VLAN
. then tap
IPv4 in the
IP Version
section.
2. Choose automatic or manual IP assignment
tap
DHCP in the
IP Assignment
section if you want automatic
iP assignment; or
Static if you want to set the iP addresses
manually.
3. If IP Assignment is Static: Set the IP addresses
enter the
IP Address
,
Subnet Mask
,
Gateway
, and
DNS
Server
address. A soft keyboard appears when you tap
an input field.
4. Save the settings
tap
Save
to save the changes, or
Undo
to leave without
saving.
5. Return to the main menu
tap
Exit
to return to the home menu.
* iP Assignment:
dHCPv6: All iPv6 addresses, including options, are obtained
automatically from a dHCPv6 server.
Autoconf: the system and gateway iP-addresses will be assigned
automatically. the options, e.g. NtP and dNS server addresses,
must be set/assigned according to the dHCP options setting. **
Static: the system and gateway iP-addresses must be configured
manually. the options, e.g. NtP and dNS server addresses, must
be set/assigned according to the dHCP options setting. **
To set or change the IPv6 settings
1. Choose IP version
tap
Settings ( ) > Administrator > IP & VLAN
. then tap
IPv6 in the
IP Version
section.
2. Choose automatic or manual IP assignment
Choose
DHCPv6, Autoconf or Static in the
IP Assignment
section according to your network requirements.*
3. If IP Assignment is Static: Set the IP addresses
enter the
IP Address
and
Gateway
. A soft keyboard appears
when you tap an input field.
4. If IP Assignment is Static or Autoconf:
DHCPoptions
tap
on or off in the
DHCP Options
section according to
your network requirements.**
if dHCP options are switched off, you must set the dNS
and NtP server addresses on the web interface.
5. Save the settings
tap
Save
to save the changes, or
Undo
to leave without
saving.
6. Return to the main menu
tap
Exit
to return to the home menu.
** dHCP options:
on: the iP parameters, like the dNS and NtP server addresses, will
be obtained automatically from a dHCPv6 server.
off: the iP parameters, like the dNS and NtP server addresses,
must be set manually.
Cisco telePresence Video Systems
d14639.08 Video Systems Getting Started Guide tC6.0, february 2013.
Copyright © 2010–2013 Cisco Systems, inc. All rights reserved.
14
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Configuration