att 1545 Manuale Utente

The HANDSET volume control switch is located on the left side of the unit.  Use it to adjust the volume on
the handset.

The ringer volume switch is located on the left side of the unit.  Use it to adjust the volume of the telephone
ring.  Set it to OFF, LO or HI.

Use the Redial feature to call the last number you dialed.  When you lift the handset or press SPEAKER to
place a call, the Message Window displays the redial number.

To use the redial feature, lift the handset, or press SPEAKER, and then press and release (AUTO) REDIAL.

The number remains in memory until you erase it or dial another telephone number.  Redial memory
accepts telephone numbers up to 16 digits long.

To erase a number stored in redial memory, hang up and then:

1.  Press and release PROGRAM.
2.  Press and release (AUTO) REDIAL.
3.  Press and release PROGRAM.

The Auto Redial feature is useful if the number called is busy.  After you dial the number and hear the busy
signal, hang up and then press (AUTO) REDIAL.

The system automatically turns on the speaker and redials the number just called.  The Message Window
displays the redial number.  For example:
5551212
AUTO REDIAL

If the system redials the number and does not detect a busy signal, you will hear ringing through the
speaker.  If the call is answered, you must lift the handset or press SPEAKER to talk with the other party.
If you do not lift the handset within 60 seconds, the system automatically hangs up.

If the number is still busy, the system will automatically hang up, waits 40 seconds, and then redials the
number.  Between redial attempts, the Message Window displays:
AUTO REDIAL
WAITING

0:40

The timer counts down from 40 to 0 seconds.  The system continues to redial every 40 seconds until:

•

 

It does not detect a busy signal.

•

 

It has redialed 10 times and still detects a busy signal.

•

 

You lift the handset; press SPEAKER; or press (AUTO) REDIAL to cancel the Auto Redial feature.