att 1545 Manuale Utente
Flash
Use the Flash feature instead of pressing the switchhook to activate services such as Call Waiting or 3-Way
Calling. You may be required to press other buttons before or after you press FLASH. Refer to the custom
calling instructions provided by your local telephone company.
Calling. You may be required to press other buttons before or after you press FLASH. Refer to the custom
calling instructions provided by your local telephone company.
To use the Flash feature, press and release FLASH.
You can store a flash in a memory location. When you store a flash, an F displays in the Message Window.
Hold
Use the Hold feature to keep a call on the line.
To put a call on hold, press and release HOLD. The light next to HOLD blinks and the Message Window
displays:
To put a call on hold, press and release HOLD. The light next to HOLD blinks and the Message Window
displays:
HOLDING CALL
SUN 12:00 AM
SUN 12:00 AM
The light continues to flash until you release a call. To release the Hold feature, lift the handset from the
base (of this phone or an extension phone) or press SPEAKER. If the handset is not in the base, press
HOLD.
base (of this phone or an extension phone) or press SPEAKER. If the handset is not in the base, press
HOLD.
Mute
The Mute feature allows you to hear your caller, but prevents your caller from hearing you. To mute a call,
press and release MUTE. The light next to the Mute button goes on. To cancel mute, press and release
MUTE again.
press and release MUTE. The light next to the Mute button goes on. To cancel mute, press and release
MUTE again.
NOTE: Putting a call on hold cancels mute.
Temporary Tone
If you have dial pulse (rotary) service, you can temporarily change from pulse to tone dialing during a call.
This is useful if you have to send tone signals for access to telephone banking or long-distance services.
This is useful if you have to send tone signals for access to telephone banking or long-distance services.
To change from pulse to tone, press and release * during the call.
Example:
1. Dial a number with the DIAL MODE switch set to DP.
2. After the call connects, press and release *.
Example:
1. Dial a number with the DIAL MODE switch set to DP.
2. After the call connects, press and release *.
Each number that you dial after this is sent as a touch tone signal.
3. After you hang up, the phone automatically returns to dial pulse service.
Memory Features
A telephone number remains stored in a given memory location until you erase it or enter another number in
the same location.
Capacity: The system can store up to 16 telephone numbers, each up to 16 digits long.
Directory Card: Remove the plastic cover and directory card. Write in the names or telephone numbers
you want to store in memory. Replace the directory card and plastic cover.
One-Touch Dialing: The 8 white spaces on the directory card are one-touch memory locations. A stored
number is dialed when you press and release the memory button next to it.
Two-Touch Dialing: The 8 gray spaces on the directory card are two-touch memory locations. After you
store a number here, you must first press and release LOWER and then press and release the memory button
next to it.
the same location.
Capacity: The system can store up to 16 telephone numbers, each up to 16 digits long.
Directory Card: Remove the plastic cover and directory card. Write in the names or telephone numbers
you want to store in memory. Replace the directory card and plastic cover.
One-Touch Dialing: The 8 white spaces on the directory card are one-touch memory locations. A stored
number is dialed when you press and release the memory button next to it.
Two-Touch Dialing: The 8 gray spaces on the directory card are two-touch memory locations. After you
store a number here, you must first press and release LOWER and then press and release the memory button
next to it.