HP digital sender 9200c Manuale Di Servizio
Using diagnostic tools
Diagnostic tests can be run from the control panel to validate the hardware operation.
Scanner tests
The following diagnostic tests are available for the scanner. They can be found in the
DIAGNOSTICS menu on the control panel.
DIAGNOSTICS menu on the control panel.
■
Lower lamp-This test turns on the lamp and a “Lower Lamp (scanner) is on” message appears
on the control panel. The user must verify that the lamp is on.
on the control panel. The user must verify that the lamp is on.
■
Sensors-This tests the ADF Empty, Register, ADF Jam Cover, ADF Output Bin Full, and Flatbed
Cover Open sensors. The user must manually activate the sensors to verify them.
Cover Open sensors. The user must manually activate the sensors to verify them.
■
ADF input motor-This test turns on the ADF input motor and a “ADF Input Motor is on” message
appears on the control panel. The user must verify that the motor is on.
appears on the control panel. The user must verify that the motor is on.
■
ADF input reverse-This test turns on the ADF input motor and a “ADF Input Motor is on”
message appears on the control panel. The user must verify that the motor is on.
message appears on the control panel. The user must verify that the motor is on.
■
Flatbed motor-This test turns on the flatbed motor and a “ADF Output Motor is on” message
appears on the control panel. The user must verify that the motor is on.
appears on the control panel. The user must verify that the motor is on.
■
ADF read motor-This test turns on the ADF read motor and a “ADF Read Motor is on” message
appears on the control panel. The user must verify that the motor is on.
appears on the control panel. The user must verify that the motor is on.
■
ADF read motor reverse-This test turns on the ADF read motor and a “ADF Read Motor is on”
message appears on the control panel. The user must verify that the motor is on.
message appears on the control panel. The user must verify that the motor is on.
■
ADF duplex solenoid
■
ADF LED indicator
Control panel tests
In addition to the scanner tests in the DIAGNOSTICS menu, the following diagnostic tests are
available for the control panel.
available for the control panel.
LED test
Follow these instructions to test the functionality of the control-panel LEDs.
1
Press the
M
ENU
button on the control panel and select the DIAGNOSTICS menu.
2
Select CONTROL PANEL, and then select the LEDs test. The LEDs test turns each LED on and
off in order to verify its functionality.
off in order to verify its functionality.
Display test
Follow these instructions to test the functionality of the control-panel display.
1
Press the
M
ENU
button on the control panel and select the DIAGNOSTICS menu.
2
Select CONTROL PANEL, and then select the DISPLAY test. The display test shows test
patterns on the control-panel display.
patterns on the control-panel display.
Using diagnostic tools
175