HP ml350 Manuale Utente
Removal and replacement procedures 57
4.
Remove the battery.
IMPORTANT:
Replacing the system board battery resets the system ROM to its default
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
System board
To remove the component:
1.
Power down the server (on page
2.
Do one of the following:
o
Unlock and remove the bezel ("
o
Extend the server from the rack (on page
3.
Remove the access panel.
4.
Remove the air baffle ("
5.
Remove the system fans (on page
6.
Remove all expansion boards ("
" on page
7.
Remove the cache module ("
8.
Remove all FBDIMMs ("
9.
Remove the PPM ("
10.
Remove the heatsink ("
CAUTION:
To avoid damage to the processor:
•
Handle the processor only by the edges.
•
Do not touch the bottom of the processor, especially the contact area.