HP ml350 Manuale Utente
Removal and replacement procedures 64
Power supply backplane
To remove the component:
1.
Power down the server (on page
2.
Remove the power supplies ("
3.
Do one of the following:
o
Unlock and remove the bezel ("
o
Extend the server from the rack (on page
4.
Remove the access panel.
5.
Remove the air baffle ("
6.
Remove the system fans (on page
7.
Remove all expansion boards ("
NOTE:
Removing the processors, PPM, FBDIMMs, and cache module from the system board is
not necessary for this procedure.
8.
Remove the system board ("
9.
Disconnect the cables from the power supply backplane.
10.
Remove the power supply backplane.
To replace the component, reverse the removal procedure.