HP pavilion xh500 Manuale Di Servizio

Solving Problems with Your Computer 
Troubleshooting Techniques 

108 Reference 

Guide 

If the serial or parallel port is not working  

•  Make sure the port connection is secure. 
•  Check the port settings in Control Panel: open the hardware Device Manager, then 

double-click Ports (COM & LPT). 

•  Test the ports with the e-Diagtools diagnostics—see “Testing Hardware Operation” 

on page 111. 

If the USB port is not working  

•  Contact the vendor of the peripheral device or check the HP notebook web site 

(www.hp.com/notebooks) for the latest versions of the USB drivers and the driver for 
the device. 

•  Check the port settings in Control Panel: open the hardware Device Manager, then 

double-click Universal Serial Bus Controller. 

You may also want to test the USB port with diagnostics. See “Testing Hardware 
Operation” on page 111. 

Startup problems 

If the computer doesn’t respond when you turn it on 

•  Connect the AC adapter. 
•  Slide the power switch to try turning on the unit. 
•  Reset the computer by inserting a straightened paper clip into the system-off button 

on the left side of the computer. Then turn it on by pressing the blue standby button. 

•  Don’t use the touch pad while booting or resuming. 
•  If you get no response, remove the battery and AC adapter, remove any PC cards, and 

undock the computer. Then plug in the AC adapter, reset the computer using the 
system-off button, and turn it on by pressing the blue standby button.  

•  If you still get no response, call HP for assistance.