HP procurve 2500 Manuale Utente
198
Enhancements in Release F.02.02
New Time Synchronization Protocol Options
Disabling the SNTP Mode.
If you want to prevent SNTP from being used even if selected by
timesync
(or the Menu interface’s
Time Sync Method
parameter), configure the SNTP mode as disabled.
Syntax:
no sntp
Disables SNTP by changing the SNTP mode configuration to
Disabled
.
For example, if the switch is running SNTP in Unicast mode with an SNTP server at 10.28.227.141
and a server version of 3 (the default),
and a server version of 3 (the default),
no sntp
changes the SNTP configuration as shown below, and
disables time synchronization on the switch.
Figure 95. Example of Disabling Time Synchronization by Disabling the SNTP Mode
TimeP: Viewing, Selecting, and Configuring
Timep Features
Feature
Default
Menu
CLI
Web
view the Timep time synchronization configuration
n/a
—
select Timep as the time synchronization method
TIMEP
page 198
pages 202
ff.
ff.
—
disable time synchronization
timep
page 200
—
enable the Timep mode
Disabled
—
DHCP
—
page 200
—
manual
—
page 200
—
none/disabled
—
page 200
—
change the SNTP poll interval
720 minutes
page 201
—
Even though the Time Sync Mode is set to Sntp,
time synchronization is disabled because no
sntp has disabled the SNTP Mode parameter.
time synchronization is disabled because no
sntp has disabled the SNTP Mode parameter.