HP psc 1200 Manuale Utente

9

You can make copies from originals loaded on the glass. You can also print and 
copy onto a variety of paper types, weights, and sizes. It is important, however, 
that you choose the right paper and make sure that it is loaded correctly and not 
damaged.

You can copy or scan any original by placing it on the glass.

Note: Some copy options, such as Fit to Page, will not work correctly if the 
glass and lid backing are not clean. For more information, see clean the 
glass and clean the lid backing on page 21.

Lift the lid and place the original face down on the glass in the front-left 
corner with the sides of the original touching the left and bottom edges.
It is important to use the front-left corner when using the copy feature.

Close the lid.

Following is the basic procedure for loading paper. There are specific 
considerations for loading certain types of paper, postcards, and envelopes. 
After you review this procedure, see tips for loading other types of paper in the 
paper tray on page 11, load envelopes on page 10, and load postcards, 
hagaki cards, or 4-by-6 inch photo paper on page 11.

For best results, adjust the paper settings each time you change paper types or 
paper sizes. For more information, see set the paper type on page 13.

Top edge of 
original

lid