HP psc 1200 Manuale Utente

reference guide

load originals and load paper

11

Remove all paper from the paper tray.

Slide an envelope into the tray, with the envelope flap up and to the left 
(print-side down), until it stops.

Adjust the paper-width guide against the envelope.
Be careful not to bend the envelope. 
If you are loading multiple envelopes, make sure the envelopes fit within 
the tray (do not overload it).
Consult the help files in your word processing software for details on how 
to format text for printing on envelopes.

Following is the procedure for loading postcards, hagaki cards, or 4-by-6 inch 
photo paper.

Remove all paper from the paper tray, and then slide a stack of cards or 4-
by-6 inch photo paper into the tray until it stops.
Make sure the print-side faces down.

Note: If you are using photo paper with perforated tabs, load the photo 
paper so that the tabs are closest to you.

Adjust the paper-width guide against the cards or photo paper until it 
stops.
Make sure the cards or photo paper fit within the tray (do not overload it). 

The following table provides guidelines for loading certain types of paper and 
transparency film. For best results, adjust the paper settings each time you 
change paper types and paper sizes. For more information, see set the paper 
type on page 13.

Note: Some paper types may not be available in your country/region.