HP psc 1200 Manuale Utente

hp psc 1200 series

chapter 3

10

Lower the paper tray, and if necessary, slide the paper-width guide to the 
outermost position.

Tap the stack on a flat surface to align the edges of the paper, and then 
check the paper for the following:
–

Make sure it is free of rips, dust, wrinkles, and curled or bent edges.

–

Make sure all the paper in the stack is the same size and type, unless 
you are working with photo paper.

Insert paper into the paper tray print-side down until it stops. To avoid 
bending the paper, make sure you do not push the paper in too far, or 
push too hard. If you are using letterhead, insert the top of the page first.
Do not use too much paper. Check that the stack of paper contains several 
sheets but is no higher than the top of the paper-width guide.

Slide the paper-width guide in until it stops at the edge of the paper. Make 
sure that the paper stack lies flat in the paper tray and fits under the tab of 
the paper-width guide.

Use the print feature of your software to print to envelopes with your HP PSC. Do 
not use shiny or embossed envelopes, or envelopes that have clasps or windows. 
You can load the paper tray with one or multiple envelopes.