Canon MP500 Manuale Di Servizio
![Canon](https://files.manualsbrain.com/attachments/4b6818c07b947b910f8cfb49338c2c63bdefaee1/common/fit/150/50/61ea34cb812b6780fe3b16f0b9221bd2f7635c65cee2473b66396d8b72cd/brand_logo.png)
2-4. Warnings
999.
returns to the value before the error.
Memory card is not set. Insert the
card after checking the direction.
card after checking the direction.
No memory card is inserted in the slot.
Set a memory card.
DPOF information is not saved in
the memory card.
the memory card.
DPOF print was selected in the menu,
but no DPOF files are contained in the
memory card.
but no DPOF files are contained in the
memory card.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
while, then the LCD automatically
returns to the display before the error
occurrence.
The number of copies to print is
not set. Input the number of copies.
not set. Input the number of copies.
Multi-photo print was attempted without
specifying the print quantity (with the
print quantity left "0" (zero)).
specifying the print quantity (with the
print quantity left "0" (zero)).
The error message is displayed for a
while, then disappears. Specify the print
quantity.
while, then disappears. Specify the print
quantity.
This layout is available only for
A4 or 8.5"x11"(LTR).
A4 or 8.5"x11"(LTR).
In Layout print, "Mixed 1, 2, or 3" which
is available only with A4 or LTR size
paper is selected, but the paper size is not
set to A4 or LTR.
is available only with A4 or LTR size
paper is selected, but the paper size is not
set to A4 or LTR.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
while, then the LCD automatically
returns to the display before the error
occurrence.
Settings cannot be changed when
printing stickers.
printing stickers.
With Sticker print selected, the Settings
button was pressed.
button was pressed.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
while, then the LCD automatically
returns to the display before the error
occurrence.
Change the setting after removing
the card.
the card.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
change of the Read/Write attribute was
attempted.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
while, then the LCD automatically
returns to the display before the error
occurrence.
The card is currently write-
enabled. Set to read-only mode
before performing operation.
enabled. Set to read-only mode
before performing operation.
With the memory card set to the Write-
enabled mode, Card Direct printing
operation was attempted from the menu.
enabled mode, Card Direct printing
operation was attempted from the menu.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
while, then the LCD automatically
returns to the display before the error
occurrence.
The paper size is not correct.
Check the page size you have set.
Check the page size you have set.
Non-supported size of paper for Camera
Direct printing is selected.
Direct printing is selected.
Cancel printing on the digital camera.
Failed to scan Photo Index Sheet.
Check the orientation, position and
marking. <See manual>
Check the orientation, position and
marking. <See manual>
The machine failed in scanning the
Photo Index Sheet.
Photo Index Sheet.
Press the OK button to clear the error.
The LCD automatically returns to the
display before the error occurrence.
The LCD automatically returns to the
display before the error occurrence.
Feed switch cannot be changed.
The paper source cannot be changed
from the cassette to the ASF, or vice
versa.
from the cassette to the ASF, or vice
versa.
Turn off the machine, and turn it on
again.
again.
Warning
Message on the LCD
Solution
Low ink
The following ink is low. Continue?
(Icon of each ink tank)
Yes No
- Select Yes, and press the OK button.
=> Printing starts, and it is indicated on the
LCD.
- Select No, and press the OK button.
=> Printing is cancelled, and the LCD
returns to the display immediately
before printing was attempted.
before printing was attempted.
In Camera Direct Printing, only "Yes" can be
selected.
selected.
Print head temperature
rise
rise
If the print head temperature does not fall, the
error code "5200" is displayed, indicating the
print head temperature rise error.
error code "5200" is displayed, indicating the
print head temperature rise error.
When the print head temperature falls, the
error is automatically cleared.
error is automatically cleared.
Note:
If the print head temperature exceeds the
specified limit when the scanning unit (printer
cover) is opened, the carriage does not move to
the ink tank replacement position.
specified limit when the scanning unit (printer
cover) is opened, the carriage does not move to
the ink tank replacement position.
Protection of excess
If the print head temperature does not fall, the If the print head temperature exceeds the
1-10
download service manual and resetter printer at http://printer1.blogspot.com