Allied Telesis AT-8000S Manuale Utente
Page 78
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
–
General — Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged
(full IEEE802.1q mode).
–
Access — Indicates a port belongs to a single untagged VLAN. When a port is in Access mode, the
packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled or
disabled on an access port.
disabled on an access port.
–
Trunk — Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can
be untagged.
•
Frame Type — Specifies the packet type accepted on the port. The possible field values are:
–
Admit Tag Only — Only tagged packets are accepted on the port.
–
Admit All — Both tagged and untagged packets are accepted on the port.
•
Current Reserved VLAN — Indicates that the VLAN selected by the user is reserved, if not in use by the
system.
2.
Click Modify. The Modify Interface Configuration Page opens:
Figure 47: Modify Interface Configuration Page
3.
Define the fields.
4.
Click Apply. The VLAN interface configuration is saved and the device is updated.