Allied Telesis AT-8000S 사용자 설명서

Page 78

General — Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged 

(full IEEE802.1q mode).

Access — Indicates a port belongs to a single untagged VLAN. When a port is in Access mode, the 

packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled or 
disabled on an access port.

Trunk — Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can 

be untagged.

Frame Type — Specifies the packet type accepted on the port. The possible field values are:

Admit Tag Only — Only tagged packets are accepted on the port.

Admit All — Both tagged and untagged packets are accepted on the port.

Current Reserved VLAN — Indicates that the VLAN selected by the user is reserved, if not in use by the 

system.

2.

Click Modify. The Modify Interface Configuration Page opens:

3.

Define the fields.

4.

Click Apply. The VLAN interface configuration is saved and the device is updated.