Epson PowerLite 1730W Manuale Utente
Solving Problems
77
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status.
Refer to the following table for a complete description of the
projector’s status lights:
projector’s status lights:
Temperature
light
light
Lamp light
Power light
Status lights
Light
Status
Description
Orange
The projector is in sleep or standby mode. You can unplug it or press the
P
Power button to turn it on.
Flashing
green
green
The projector is warming up. Wait for the image to appear.
Green
The projector is operating normally.
Flashing
orange
orange
The projector is cooling down. You can’t turn it back on (and you should
not unplug it) until the light stops flashing and remains orange.
not unplug it) until the light stops flashing and remains orange.
Red
There is a problem with the projector. Check the other two lights and the
information on page 77 to diagnose the problem.
information on page 77 to diagnose the problem.
Flashing red
There is a problem with the fan or temperature sensor. The air filter or
vent may be clogged. Clean them or replace the air filter as described on
page 69.
vent may be clogged. Clean them or replace the air filter as described on
page 69.
If this does not resolve the problem, stop using the projector, disconnect
the power cable, and contact Epson as described on page 87.
the power cable, and contact Epson as described on page 87.