Adam Equipment cbw 6 Manuale Utente

To set parameters, press the [Func] and [Print] keys at the same time. 

 

• The first parameter on setting the increment value will be 

displayed as "Inc  xx" where xx can be 1, 2, 5 or 10.  The first value 
shown is the default scale increment value.   

 

•  To change to a different increment value press [Tare/Ï]. 

 

• Press the [Zero/Enter] key to store the changed value and move 

to the next parameter. 

 

 

•  The standard is to have the backlight operate automatically i.e., 

turning it off when the scale is not being used.  

 

•  The backlight can be set to be "EL on" (always on), "EL AU" 

(Automatic)   or "EL oFF" (always off).  The maximum battery life is 
achieved with the backlight turned off.  

 

• Press the [Tare/Ï] key to change the setting. 

 

• Press the [Zero/Enter] to store the changed setting and move to 

the next parameter. 

 

 

• With "Au on" the memory will accumulate the weight automatically.  

 

•  "Au oFF" will enable the manual accumulation.  

 

•  "P Cont" will set the RS-232 interface to send the weight 

continuously and the accumulation function is disabled. 

 

• Press the [Tare/Ï] key to change the setting. 

 

• Press the [Zero/Enter] key to store the changed setting and 

move to the next parameter. 

15