Patton electronic industrial ethernet extender with lcd interface 3231 Manuale Utente

Connecting to the Web GUI

Model 3231 User Manual 

Now you can connect the 3231 to your local IP network and access advanced configuration features from your 
PC using a standard web browser. 

Connect the 3231’s Ethernet port (green) to the same Ethernet segment as your PC (see 

). The front-

panel Ethernet Link LED should turn on. If it does not, press the rear-panel MDI-X switch so that the Ethernet 
Link LED illuminates.You can check the connection with the ping command. 

Figure 6. Connecting the RocketLink-G to the local IP network

You can access the web management graphical user interface (GUI) using a standard web browser (such as 
Netscape Browser, Mozilla Firefox, or Internet Explorer).

1. At your PC, open a web browser and enter the IP address you assigned to the unit’s Ethernet LAN port in 

the section 

 on page 26. (In this example, 10.10.4.10.).

2. Log in to the web management home page using the username superuser and the password superuser.

See Chapter 4,

on page 34 for configuring 

features through the web interface, including SNMP, CPE Configuration, 
and STP (Spanning Tree Protocol).

Ethernet

Reset

Line

Power

5V

, 1A

Console

Connect to Ethernet port

Ethernet port

PC

Model 3231