Philips hr2027 Manuale Utente

K

  Mill sealing ring (HR2027/HR2021 only)

L

  Mill blade unit (HR2027/HR2021 only) 

Thoroughly clean the parts that come into contact with food before you use the appliance for the 

first time (see chapter ‘Cleaning’).

You can adjust the length of the cord by winding part of it round the reel in the base. Pass the cord 

through the slot in the base.

The blender is intended for fine pureeing, chopping and blending. With the blender you can prepare 

soups, sauces and milk shakes. You can also use it to process vegetables, fruit, meat, pancake batter 

etc.

 1 

 Assemble the sealing ring on the blender blade unit (Fig. ).

  

 Put the blade unit in the bottom of the blender jar (1). Screw the blade unit anticlockwise () 

until it is fixed properly.  (Fig. 3)

  

 Put the blender jar with the blade unit attached on the motor unit and fix it by turning it 

clockwise (‘click’).   (Fig. )

The blender jar can be mounted in two positions: with the handle on the right side or on the left 

side.

  

 Put the mains plug in the wall socket.

 1 

 Put the ingredients in the blender jar.

  

 Put the lid on the jar and turn it until it is firmly fixed (‘click’). 

  

 Insert the measuring cup into the opening in the lid.  (Fig. 5)

  

 Press speed button 1 or 2 to switch on the blender. 

After processing, press the pulse/off button to switch off the blender. If you want to process 

ingredients very briefly, use the pulse/off button instead of the speed buttons.
Do not let the appliance run for more than 3 minutes at a time. Let it cool down to room 

temperature between processing cycles.

If you want to crush ice cubes, put not more than 6 ice cubes (of approx. 25x35x25mm) in the 

blender jar and press the pulse button a few times.

Cut meat or other solid ingredients into smaller pieces before you put them in the blender jar.

Do not process a large quantity of solid ingredients at the same time. To get good results, we 

advise you to process these ingredients in a series of small batches.

To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the 

lid onto the rotating blades.
Disassembling the blender

 1 

 Remove the mains plug from the wall socket.

  

 Remove the lid with the measuring cup from the blender jar.

-

-

-

-

8