Hitachi 50GX49B Manuale Utente

CONNECTING EXTERNAL VIDEO SOURCES 

- 16 - 

NOTE:  When TV is set to VIDEO and a video signal is not received from the VIDEO INPUT JACK on the jack panel of 
the TV (i.e., VCR/laserdisc player, etc. is not connected or the video device is OFF), the set will appear to be OFF. 

1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set 
below. 

2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack. 

3. Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO mode disappears 
automatically after approximately eight seconds. 

4. Press the INPUT button to return to the previous channel 

. 

1. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set 
below. 

2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 

3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. 

4. Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears 
automatically after approximately eight seconds. 

5. Press the INPUT button to return to the previous channel.