Oricom p100 Manuale Utente

 
 
 

9 of 16 

 

3.  When you enter more than 14 digits,   turns on.  If you attempt to 

enter more than 20 digits, you’ll hear a reject tone. 

4.  If you make a mistake, press       to erase one digit at a time.  Or you 

can press and hold       for 2 seconds to clear the entire number and 
return the phone to standby. 

5. Press 

 

   to seize phone line and dial out the number, the   icon 

turns on. 

 
Redialling 
The last number dialled out will be stored as the redial number. 
1. Press 

 

   and wait for the dial tone. the   icon turns on. 

2. Press 

 

  .  The last number dialled, if any, is displayed and dialled 

out. 

A redial number can be reviewed before you dial it out. 
1. Press 

 

  .  The last number dialled, if any, is displayed. 

2. Press 

 

   to seize phone line and dial out the number    turns on. 

 
Phonebook dialling 
You need to create a phonebook record before using this feature.  Refer 
to the section of Setting up phonebook records. 
1. Press 

 

   the 

 turns on. 

2.  Press   0   to   9   to view the stored phone number.  If no phone 

number is stored in a particular location, a blank screen is displayed 
instead.  If   turns on, the number contains more than 14 digits.  
Press  

   to see the rest of the digits. 

3. Press 

 

   to seize phone line and dial out the displayed phonebook 

record, the   icon turns on. 

 
During a Call 
Call Timer 

  

The call timer will be displayed a short while after your call is connected.  
It shows the duration of the call.  This timer is shown in minutes and 
seconds (MM-SS) in the first hour.  After that, it will be shown in hours 
and minutes (HH-MM). 
When you end a call, the timer will be displayed for 5 more seconds 
before the screen returns to standby mode 
 

01-15  

 
 
 

10 of 16 

 

 
Adjust the volume 

Press  

   to adjust the receiver volume to High, Medium or Low. 

 
Mute the call 
When on a call you can talk to someone in the same room without your 
caller hearing you. 

1. Press 

 

    the   icon turns on. The caller will now not hear you but 

you will still be able to hear the caller. 

2. Press 

 

   again to turn off the mute feature.   

 
Receive a second call 
If you have subscribed to your telephone network operators service CID 
on Call Waiting, the telephone will show the phone number of another 
incoming call while you are talking on the phone.  
1. Press 

      listen for dial tone

 

then press  2 

  

to put the current call on 

hold and talk with the second caller.   

2.  Subsequent presses of       and 2   will toggle you between the 2 

callers.  In any case, the display will show the phone number of the 
first caller. 

 
Refer to information provided by your telephone network operator. 
 
Caller ID 
You will need to subscribe to the CID service provided by your telephone 
network operator in order to use this feature.   
Your phone stores the last 20 received CID records.  Each record holds 
up to 20 digits.   
 
Reviewing CID records 

 Turns on when a new CID number is received. 

1. Press 

 

   when the phone is in standby.  The most recent CID 

record is displayed.  You’ll see a blank screen if there is no CID 
record. 

2. If 

the  icon turns on, the number contains more than 14 digits.  

Press  

   to see the rest of the digits. 

3. Press 

     to see older entries and   

   to see newer entries.   

4. Press 

 

   again or press      to return the phone to standby. The  

 

icon turns off.