System Planning Corporation GTLITEV3 Manuale Utente
GlobalTrak ™
GT Lite Operation and Maintenance Manual
Command:
AT+PARAM=”MOUNT”,”<mount>”
<mount>:
Mount enable status.
0 = Disabled
1 = Enabled
Expected Response:
OK
View Motion Enable Parameter
View the current status of the Motion Enable parameter.
Command:
AT+PARAM=”MOTION”
Expected Response:
APPLICATION: (SYSSTAT_ParamCommandHandler) Enter.
+SYSSTAT: MOTION=<mot>
+SYSSTAT: MOTION=<mot>
OK
<mot>: Motion enable status.
0 = Disabled
1 = Enabled
Set Motion Enable Parameter
Set a new value for the Motion Enable parameter.
Command:
AT+PARAM=”MOTION”,”<mot>”
<mot>: Motion enable status.
0 = Disabled
1 = Enabled
Expected Response:
OK
ZigBee Commands
Add ZigBee EUID
Add a single EUID to the ZigBee binding table. EUID’s are 64 bit addresses assigned to each
ZigBee node. The GT Lite will only talk to nodes with EUID’s in its binding table.
Command:
AT+ZIGADD=”[EUID]”
Prepared: R. Straz
Date: July 25, 2007
Page 84 of
139