TP-Link Technologies Co. Ltd. C20I Manuale Utente

 

- 96 - 

There are two submenus under the Advanced Routing menu as shown in Figure 4-86:  Static 

Route List and System Routing Table. Click any of them, and you will be able to configure the 

corresponding function. 

Choose menu “Advanced Routing  →  Static Route List”, and then you can configure the static 

route in the next screen (shown in Figure 4-87). A static route is a pre-determined path that 

network information must travel to reach a specific host or network. 

 

Figure 4-87 Static Route 

1. Click 

Add New shown in Figure 4-87, you will see the following screen. 

 

Figure 4-88 Add or Modify a Static Route Entry 

2.  Enter the following data: 

¾

 

Destination IP Address - The Destination IP Address is the address of the network or 

host that you want to assign to a static route. 

¾

 

Subnet Mask  - The Subnet Mask determines which portion of an IP Address is the 

network portion, and which portion is the host portion. 

¾

 

Gateway - This is the IP Address of the gateway device that allows for contact between 

the router and the network or host. 

3. Select 

Enabled or Disabled for this entry on the Status drop-down list.