TP-Link Technologies Co. Ltd. C20I Manuale Utente

 

- 97 - 

4. Click 

the 

Save button to make the entry take effect. 

Click the Delete button to delete the entry. 

Click the Enable Selected button to enable the selected entries. 

Click the Disable Selected button to disable the selected entries. 

Click the Delete Selected button to delete the selected entries. 

Choose menu “Advanced Routing → System Routing Table”, and then you can view the 

System Routing Table in the next screen (shown in Figure 4-89). System routing table views all of 

the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface 

will be displayed for each entry. 

 

Figure 4-89 System Routing Table 

¾

 

Destination Network - The Destination Network is the address of the network or host to 

which the static route is assigned.   

¾

 

Subnet Mask - The Subnet Mask determines which portion of an IP address is the network 

portion, and which portion is the host portion.   

¾

 

Gateway - This is the IP address of the gateway device that allows for contact between the 

router and the network or host.   

¾

 

Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN 

(internal wired and wireless networks), or on the WAN (Internet).