TP-Link Technologies Co. Ltd. TDW8151NV4 Manuale Utente
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
8
Chapter 3 Quick Installation Guide
3.1 TCP/IP Configuration
The default IP address of the TD-W8151NTD-W8151N 150Mbps Wireless N ADSL2+ Modem
Router is 192.168.1.1. And the default Subnet Mask is 255.255.255.0. These values can be
changed as you desire. In this guide, we use all the default values for description.
Router is 192.168.1.1. And the default Subnet Mask is 255.255.255.0. These values can be
changed as you desire. In this guide, we use all the default values for description.
Connect the local PC to the LAN port of the Modem Router. And then you can configure the IP
address for your PC by the following way:
address for your PC by the following way:
1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC.
If you need instructions as to how to do this, please refer to T3 in
.
2) Then the built-in DHCP server will assign IP address for the PC.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the Start menu on your desktop, select run tab, type cmd or command in the field
and press Enter. Type ping 192.168.1.1 on the next screen, and then press Enter.
Please click the Start menu on your desktop, select run tab, type cmd or command in the field
and press Enter. Type ping 192.168.1.1 on the next screen, and then press Enter.
If the result displayed is similar to the screen below, the connection between your PC and the
modem router has been established.
modem router has been established.
Figure 3-1
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the modem router.
connected to the modem router.
Figure 3-2
You can check it follow the steps below: