AIR802 LLC AP25N01 Manuale Utente
AP25N01 User Manual
14
Station WDS
WDS (Wireless Distribution System) mode can be connected to the Access Point WDS
mode and enables packet forwarding at layer 2 level. Unlike Station mode, it is fully
transparent at layer 2 level.
mode and enables packet forwarding at layer 2 level. Unlike Station mode, it is fully
transparent at layer 2 level.
Access Point
This mode can be connected to Station mode and forwards all traffic to the network
devices connected to the Ethernet devices of the Station.
devices connected to the Ethernet devices of the Station.
Access Point WDS
This mode can be connected to Station WDS mode. Using WDS protocol, it allows a
client or station device to bridge wireless traffic transparently.
client or station device to bridge wireless traffic transparently.
Repeater WDS
This mode consists of a Station WDS and an Access Point WDS mode. The Repeater
WDS must first link with an Access Point WDS, and then it can link with a Station WDS.
It acts as an extension to the link and you can add more Repeater WDS devices as
necessary.
NOTE:
WDS must first link with an Access Point WDS, and then it can link with a Station WDS.
It acts as an extension to the link and you can add more Repeater WDS devices as
necessary.
NOTE:
1. The WDS protocol used for Station WDS, Access Point WDS, and Repeater
WDS is not defined as a standard, thus compatibility issues between equipment
from different vendors might arise.
from different vendors might arise.
2. For Repeater WDS, ESSID must be the same for the Remote AP and the Local
AP. The channels used to link one repeater to another Repeater will follow the
Access Point WDS connection's selected channel.
Access Point WDS connection's selected channel.
Access Point Parameters Settings