AIR802 LLC AP25N01 Manuale Utente
AP25N01 User Manual
15
Local AP-ESSID
This is the Service Set Identifier used to identify the operator’s wireless LAN. It should
be specified while operating in Access Point or Access Point WDS mode.
All of the client devices within its range will receive broadcast messages from the
access point advertising this SSID.
be specified while operating in Access Point or Access Point WDS mode.
All of the client devices within its range will receive broadcast messages from the
access point advertising this SSID.
Hide SSID
Once checked, this will disable advertising the SSID of the access point in broadcast
messages to wireless stations. This option is only available in Access Point, Access
Point WDS and Repeater WDS mode.
Once checked, this will disable advertising the SSID of the access point in broadcast
messages to wireless stations. This option is only available in Access Point, Access
Point WDS and Repeater WDS mode.
Country Code
Different countries have different power level requirements and frequency selections. To
ensure device operation follows regulatory compliance rules, select the correct country
code for the location where the device will be used. The channel list, output power
limits, IEEE 802.11 and Channel-Spectrum Width modes will be tuned according to
regulations of the selected country.
ensure device operation follows regulatory compliance rules, select the correct country
code for the location where the device will be used. The channel list, output power
limits, IEEE 802.11 and Channel-Spectrum Width modes will be tuned according to
regulations of the selected country.
No Country Set
When this option is checked, only the following frequency ranges are available:
11n 2.4GHz (2412 to 2462MHz), 11n 5GHz (5180 to 5320MHz) and 5745-5825MHz.
11n 2.4GHz (2412 to 2462MHz), 11n 5GHz (5180 to 5320MHz) and 5745-5825MHz.
Wireless Profile
• NA is the 11n 5GHz band and represents a mixed of 802.11n and 802.11a mode.
• NG is the 11n 2.4GHz band and represents a mix of 802.11n, 802.11g and
• NG is the 11n 2.4GHz band and represents a mix of 802.11n, 802.11g and
802.11b mode.
Channel Spectrum Width
• 20M represents data transmission at a bandwidth of 20MHz.
• 20/40M represents data transmission at either 20MHz or 40MHz. In a very noisy
• 20/40M represents data transmission at either 20MHz or 40MHz. In a very noisy
environment it automatically falls back to 20MHz to be more resilient to the
interference. In situations where auto fall back does not happened, manually
changing channel spectrum width to 20MHz will help reduce interference on the
link and improve performance.
interference. In situations where auto fall back does not happened, manually
changing channel spectrum width to 20MHz will help reduce interference on the
link and improve performance.
NOTE: 40MHz bandwidth is non-standard for 802.11n/g mode operation. If you
experience unstable performance, change Channel Spectrum Width to 20M.
experience unstable performance, change Channel Spectrum Width to 20M.
Guard Interval:
???
Channel – Frequency
This sets the operating frequency of the device. The frequency range available depends
on the country domain selected in Country Code. For the 5GHz frequency range, some
countries have regulations that control DFS characteristics. Selecting one of these
on the country domain selected in Country Code. For the 5GHz frequency range, some
countries have regulations that control DFS characteristics. Selecting one of these