C. D. V. I. F0101000019 Manuale Utente

Edition 09/2000

4

3.  Keep the jumper on to delete all the badges.

4.  The display indicates                                 during the reset.

5.  The display switches off at the end of the reset.

6.  Remove to jumper from the ST1.

 

Proximity Badges:  Proximity badges can be programmed on door 1 and 2.

DOOR 1: controlled by reader 1

DOOR 2: controlled by reader 2

Once the door is selected (door 1 and/or door 2) in Menu 1 all the badges entered in the control unit will have
the same door configuration.

Radio frequency: The RF transmitter can be programmed on door 1 and 3.

DOOR 1: Controlled by channel 1 of the transmitter

DOOR 3: Controlled by channel 2 of the transmitter

Select one relay (door) 1 or 3  and press on one of the button of the Transmitter to open door 1 or door 3
according to the channel set on each door.

Two choices are available:

The display indicates          

door 1 and 2 can be programmed with proximity badges.

Door 1

Door 2