ZTE Corporation BS8800C200 Manuale Utente
ZXSDR BS8800 C200 Installation Manual
�
The installation position of connector of enhanced mast should
have no impact on adjustment of antenna direction and angle.
have no impact on adjustment of antenna direction and angle.
�
Keep an antenna rack vertical with the level.
�
If installing an arrester on the rack of omnidirectional antenna,
extend the rack 1～1.5 m away.
extend the rack 1～1.5 m away.
�
If there is no arrester on the antenna rack, install an arrester.
The horizontal interval between omnidirectional antenna and
arrester should be not less than 2.5 m. Locate the antenna
within a protective area of 30° downtilt of arrester top.
The horizontal interval between omnidirectional antenna and
arrester should be not less than 2.5 m. Locate the antenna
within a protective area of 30° downtilt of arrester top.
�
All welding parts of antenna rack should be covered a layer
of antirust paint on the surface. Make sure all welding parts
fastened and no faulty or lacking welding.
of antirust paint on the surface. Make sure all welding parts
fastened and no faulty or lacking welding.
Steps
1. Installing the antenna rack on the roof
There are two conditions for installation:
�
Installing the rack on the roof without a wall
�
Installing the rack inconvenient to fix on the roof with a wall
There are various types of antenna racks. Take one type for
example. The structure of antenna rack is as shown in
example. The structure of antenna rack is as shown in
116
Confidential and Proprietary Information of ZTE CORPORATION