Tranzeo Wireless Technologies Inc GNVPZ1NT3 Manuale Utente
Chapter 2: Connecting to the EnRoute500
TR0153 Rev. E1
18
If you are configuring multiple EnRoute500s with the same computer in rapid
succession, it may be necessary to clear the ARP cache since the IP addresses for
the EnRoute500s will all be the same, but the MAC addresses will vary. The
following commands can be used to clear the ARP cache
Windows XP (executed in a command prompt window)
succession, it may be necessary to clear the ARP cache since the IP addresses for
the EnRoute500s will all be the same, but the MAC addresses will vary. The
following commands can be used to clear the ARP cache
Windows XP (executed in a command prompt window)
arp -d *
to clear the entire cache, or
arp -d 169.254.253.253
to just clear the EnRoute500 entry
Linux
arp -d 169.254.253.253
2.3
Default Login and Password
The EnRoute500’s default login is ‘
admin’ and the default password is ‘default’. The login and
password are the same for the web interface and the CLI. Changing the password using one of
the interfaces will change it for the other interface as well.
the interfaces will change it for the other interface as well.
2.4
Resetting the ‘admin’ Password
The EnRoute500 supports a password recovery feature for the ‘admin’ account, should the
password be lost.
password be lost.
Completing the password recovery procedure requires that you contact
Tranzeo
Tranzeo
technical
support.
Please
check
the
Tranzeo
website
(www.tranzeo.com) for how to contact technical support and hours of
operation.
operation.
For security purposes, the ‘admin’ password can only be reset in the first 15
minutes of operation of the device. You will be able to power the unit on and
off to be able to reset the password.
minutes of operation of the device. You will be able to power the unit on and
off to be able to reset the password.