Tranzeo Wireless Technologies Inc GNVPZ1NT3 Manuale Utente
Chapter 3: Using the Web Interface
TR0153 Rev. E1
19
3
Using the Web Interface
The EnRoute500 has a web interface accessible through a browser that can be used to
configure the device and display status parameters.
configure the device and display status parameters.
3.1
Accessing the Web Interface
You can access the web interface by entering one of the EnRoute500’s IP addresses in the
URL field of a web browser (see section 2.2 for a description of how to access an unconfigured
EnRoute500 using its Ethernet interface). When you enter this URL, you will be prompted for a
login and password. The default login and password used for the web interface are ‘
URL field of a web browser (see section 2.2 for a description of how to access an unconfigured
EnRoute500 using its Ethernet interface). When you enter this URL, you will be prompted for a
login and password. The default login and password used for the web interface are ‘
admin’
and ‘
default’, respectively.
Figure 5. Login window for web interface
Since the certificate used in establishing the secure link to the EnRoute500 has not been
signed by a Certification Authority (CA), your browser will most likely display one or more
warnings similar to those shown below. These warnings are expected and can be disregarded.
Figure 6. Certificate warning