Honeywell International Inc. CS19A Manuale Utente
3 - 22
If you want to assign an alphabetic name to the scanner, create a Code 128 bar
code containing “~BT_NAM
code containing “~BT_NAM
name.” followed by a FNC3 character (hexidecimal
83), where
name is the new scanner name. Scan the Reset bar code (
inside the back cover of this manual).
Application Work Groups
Your cordless system can have up to 7 scanners linked to one base. You can
also have up to 7 work groups. If you want to have all of the scanners’ settings
programmed alike, you don’t need to use more than 1 work group. If you want
also have up to 7 work groups. If you want to have all of the scanners’ settings
programmed alike, you don’t need to use more than 1 work group. If you want
each scanner to have unique settings (e.g., beeper volume, prefix/suffix, data
formatter), then you may program each scanner to its own unique work group
and may program each scanner independently. For example, you might want to
have multiple work groups in a retail/warehouse application where you need to
have different data appended to bar codes used in the warehouse area versus
the retail area. You could assign all the scanners in the retail area to one work
group and those in the warehouse to another. Consequently, any desired
changes to either the retail or warehouse area would apply to all scanners in
that particular work group. EZConfig (
formatter), then you may program each scanner to its own unique work group
and may program each scanner independently. For example, you might want to
have multiple work groups in a retail/warehouse application where you need to
have different data appended to bar codes used in the warehouse area versus
the retail area. You could assign all the scanners in the retail area to one work
group and those in the warehouse to another. Consequently, any desired
changes to either the retail or warehouse area would apply to all scanners in
that particular work group. EZConfig (
) makes it easy for you to pro-
gram your system for use with multiple scanners and multiple work groups.
The scanner keeps a copy of the menu settings it is using. Whenever the scan-
ner is connected or reconnected to a base, the scanner is updated with the lat-
est settings from the base for its work group. The scanner also receives menu
setting changes processed by the base. If a scanner is removed from one base
and placed into another base, it will be updated with the new base settings for
whatever work group that the scanner was previously assigned. For example, if
the scanner was in work group 1 linked to the first base, it will be placed in work
group 1 in the second base with the associated settings.
ner is connected or reconnected to a base, the scanner is updated with the lat-
est settings from the base for its work group. The scanner also receives menu
setting changes processed by the base. If a scanner is removed from one base
and placed into another base, it will be updated with the new base settings for
whatever work group that the scanner was previously assigned. For example, if
the scanner was in work group 1 linked to the first base, it will be placed in work
group 1 in the second base with the associated settings.
Preliminary Draft