Honeywell International Inc. CS19A Manuale Utente

4 - 8

If there are no trigger pulls during the timer interval, the scanner goes 
into power down mode.  Whenever the trigger is enabled, the timer is 
reset.  If the scanner is placed in the charge base cradle and the bat-
tery is in the process of being charged, the scanner will not go into 
power down mode.  

Default = 3600 seconds.

Note: When the scanner is in power down mode, pull the trigger to 

power the unit back up.  There will be a set of power up beeps 

and a delay of up to a few seconds for the radio to join.  The 

scanner will then be ready to use.

This feature senses when the scanner is removed from the stand and tells it to 
begin manual triggering.  When you scan Sensor On, the scanner goes into 
manual trigger mode when it is removed from the stand.  For example, if  the 

Preliminary Draft