Honeywell International Inc. IM14 Manuale Utente
IF2 Network Reader
3
About the Ready-to-Work Indicator
The blue Ready-to-Work indicator shows when an application is communicating
with the Basic Reader Interface (BRI) server or LLRP client on the IF2. The next
table explains the different states of the Ready-to-Work indicator.
with the Basic Reader Interface (BRI) server or LLRP client on the IF2. The next
table explains the different states of the Ready-to-Work indicator.
For more information on the BRI server, see "Configure the BRI Server" on page 3-
31.
31.
About the Network and Power Ports
The IF2 network and power ports are located under the cable cover.
IF2 Network and Power Ports
Wired LAN
•
Off when there is no Ethernet connectivity.
•
On when an Ethernet link is detected.
•
Flashes when there is activity on the Ethernet network.
RFID status
•
Green if RF power is being transmitted.
•
Red if an antenna fault is detected, or if the reader
cannot output the requested RF power level.
cannot output the requested RF power level.
•
Off if RF power is off.
Tag ID
Flashes when an RFID tag ID is successfully read or written to.
Icon
Name
Description
Status
Description
Off
IF2 does not have power.
Blinking
IF2 is initializing and not yet ready to use, or no application is currently communicating
with the IF2 BRI or LLRP server or LLRP server.
with the IF2 BRI or LLRP server or LLRP server.
Steady
An application is communicating with the BRI server or an LLRP client has connected
to the IF2.
to the IF2.
GPIO
IOIOI
GPIO port
DC power port
COM 1
Ethernet port
(high power POE)
(high power POE)